Automatic Time-Eye Server Installation - ATESI
Warning: use only in case of reinstallation:

0) in case you have no ATESI floppy disks:

  unzip the attached ATESI zip-file (atesi-zip) received via email
  and initialise ATESI floppy #1 (kern.flp) and ATESI floppy#2
  (mfsroot.flp) by running rawrite.exe;

1) insert ATESI floppy #1 (kern.flp) into the floppy drive
2) insert ATESI CDrom into the CD drive
3) reset or power-cycle the PC.
4) wait until message on screen:

  Please insert MFS root floppy and press enter:

5) insert ATESI floppy #2 (mfsroot.flp) into the floppy drive
6) press enter
7) wait until message on screen:

  Hit [enter] to boot immediately, or any other key for command
  prompt

8) press enter

9) wait until message on screen:

  Kernel Configuration Menu

  (1) Skip kernel configuration and continue with installation

  (2) Start kernel configuration in full screen visual mode

  (3) Start kernel configuration in CLI mode

  "(1) is marked"

10) press enter
11) wait until message on screen:

  ATTENTION ! - This will format your disk da0 !!!

  TURN OFF THE PC NOW IF YOU ARE NOT SURE!

  hit <enter> to continue ..

12) press enter
13) wait until message on screen:

  mounting of ad0s1a over /tmp  . done!

  restoring of the neweye.dmp . done! - this process takes a longer
  time, appr. 20 minutes

  copying individual files  .  umounting /tmp  .  done!

14) wait until message on screen:

          Now reboot the PC without floppy or cdrom injected!

15) reboot the PC
16) wait until message on screen:

          FreeBsd/i386 (time-eye.sunpendulum.at) (ttyv0)
          Login:

The ATESI procedure is finished and the Sunpendulum Time-Eye
Server is online!